T-shirts to banners, mugs to team kits. Each product knows its print areas in millimetres, the methods that can print them and how it is priced, so the storefront, the studio, your quotes and the floor all agree.
PricedInk colours × quantityper area, with breaks on the blank
Fixed print areas
Print areaFull front350 × 450 mm
Print areaLeft chest100 × 100 mm
MethodsFive ways to decorate it
Screen printDTGDTFVinyl / HTVEmbroidery
PricedInk colours × quantityper area, with breaks on the blank
Fixed print areas
Print areaFull wrap200 × 85 mm
Print areaOne side85 × 85 mm
MethodSublimationmirrored onto transfer paper
Sublimation
PricedPer placementby quantity
Fixed print areas
Print areaFull wrap180 × 70 mm
Print areaOne side70 × 70 mm
MethodSublimationmirrored onto transfer paper
Sublimation
PricedPer placementby quantity
Buyer-sized
SizeThe buyer types itup to 2000 × 1000 mm a panel
Bleed and hem5 mm and 25 mmkept clear on the canvas
FinishingHem and eyeletsor pole pockets, wind slits, rope
PricedPer m²by the material picked
Buyer-sized
Cut lineTraced from the artworka CutContour line for the cutter
FinishingKiss-cut or die-cuton gloss, matt or clear vinyl
MethodPrint and cut3 mm bleed, 300 dpi
Print & cut
PricedBy size bandand quantity
Printed paper
FacesFront and back85 × 55 mm, trimmed
Bleed and safe area3 mm bleedshown as the buyer works
MethodDigital printtext from 1.5 mm, 300 dpi
Digital print
PricedBy quantityand paper
Fixed print areas
Print areaFront panel110 × 55 mm
Print areaSide60 × 40 mm
MethodsThread or ink
EmbroideryScreen print
PricedPer 1,000 stitchesby quantity
Fixed print areas
Print areaFront280 × 320 mm
Print areaBack280 × 320 mm
MethodsInk or thread
Screen printEmbroidery
PricedInk colours × quantityor per 1,000 stitches
Fixed print areas
Print areaBarrel45 × 8 mm
Smallest run12 pensset by the method
MethodPad printup to 4 ink colours
Pad print
PricedInk colours × quantityper pen
Configurable
Print areaThe plate80 × 30 mm, engraved
RecipientsOne plate eachfrom a list of names
MethodLaser engravingtext from 2 mm
Laser engraving
PricedBy engraving timeper run
Configurable
PanelsFront and back400 × 600 mm each, sublimated
PartsBody, sleeves, collareach with its own colour
Names and numbersFrom the rosterone print file per player
PricedPer panelby quantity
02 · Product types
Your whole range, already measured.
Sixteen product types come ready in seven packs, each with its print areas measured and its methods matched. Load the packs you sell, then change anything.
T-shirtApparel
HoodieApparel
PoloApparel
JerseyTeamwear
ShortsTeamwear
SocksTeamwear
CapPromotional
Tote bagPromotional
PenPromotional
MugDrinkware
Water bottleDrinkware
BannerSigns and stickers
StickersSigns and stickers
Business cardPrinted paper
FlyerPrinted paper
Acrylic awardAwards
+Sell something else? Add your own product type in the back office: its sides, its areas in mm and the methods each takes.
03 · Four kinds of product
A T-shirt, a banner and a jersey are not set up the same way.
Each kind gets the setup that fits how it is made. All four end in the same place: an area and a method your press can print.
Fixed print areas
The area is part of the product.
Areas on each side: front, back, chest, sleeve, wrap
Each area and method pair keeps its own limits
Switch an area off for one product
Buyer-sized
The buyer types the size.
Bleed and safe area added for them
Hems, eyelets and pole pockets kept clear
Large pieces tiled with a 25 mm overlap
Configurable
Built from parts.
Body, sleeves, collar and more
Options with rules between them
Panels sublimated edge to edge
Printed paper
Sheets with two faces.
Both faces at their trimmed size
Folds, bleed and safe area
Paper and laminated stock in steps
04 · Print areas
Drawn in millimetres, to the size your press prints.
Every area is measured on its side of the product. Pair it with a method and the limits of both apply. The smaller one wins, so artwork lands where it can be made.
FrontBack
Area 2 · Left chest
Pick a method.
100 × 100mm on the left chest. Screen print alone could print 350 × 450 mm.
100 × 100mm on the left chest. Embroidery alone could print 300 × 300 mm.
Colours12 thread coloursSmallest text4 mmSmallest line0.8 mmStitchesup to 30,000
100 × 100mm on the left chest. DTG alone could print 400 × 500 mm.
ColoursFull colourSmallest text5 mmSmallest line0.5 mmFabriccotton and blends
100 × 100mm on the left chest. DTF alone could print 300 × 400 mm.
ColoursFull colour + whiteSmallest text5 mmSmallest line0.5 mm
100 × 100mm on the left chest. Vinyl / HTV alone could print 300 × 400 mm.
Colours3 vinyl layersSmallest text8 mmSmallest line1 mm
Areas 1 and 4 are 350 × 450 mm, area 3 is 300 × 100 mm and the sleeve 80 × 300 mm. Each one holds every method to its own size.
05 · What prints on what
Eleven methods. Each one only where it works.
The starting map the packs load. Switch pairings on or off for your own floor, and the studio only ever offers what you can make.
Product
Screen print
Embroidery
DTG
DTF
Vinyl
Sublimation
UV print
Print & cut
Digital
Pad print
Laser
Apparel
T-shirt
Hoodie
Polo
Teamwear
Jersey
Shorts
Socks
Promotional
Cap
Tote bag
Pen
Drinkware
Mug
Water bottle
Signs and stickers
Banner
Stickers
Printed paper
Business card
Flyer
Awards
Acrylic award
06 · Print settings
Each product type prints to its own rules.
Resolution at the final size, bleed, safe area, cut lines and mirroring are set per type and checked in the studio, before anything reaches the floor.
Print area
T-shirts
DTF, screen print and embroidery each get their own output.
DTFFull colour plus white, mirrored, 300 dpi at the printed size
Screen printOne film per ink, up to 6 spot colours, white underbase on dark garments, choked under the colours
Embroidery12 threads, up to 30,000 stitches, text from 4 mm. The stitch count is estimated for the quote; your digitiser’s file goes with the job
CheckedResolution at size, colour count, smallest text and line, and the edge of the area
HELLOCutContour linetraced from the artwork3 mm bleed
Cut line
Stickers
Printed and cut on one machine, so the cut line has to be exact.
SizeThe buyer types it; the canvas is built around it
Bleed3 mm past the cut line
Cut lineTraced from the artwork’s edge and saved as a CutContour SVG for the cutter
FinishingKiss-cut on sheets to peel off, or die-cut one by one, on gloss, matt or clear vinyl
Resolution300 dpi at size; text from 3 mm
GRAND OPENINGBleed 5 mmSafe areaHem 25 mm, kept clearEyelets every 500 mm · tiled panels overlap 25 mm
BleedSafe area
Banners
Big, buyer-sized and finished, so the keep-outs matter.
SizeTyped by the buyer, up to 2000 × 1000 mm a panel
MaterialVinyl 510 gsm or mesh: 5 mm bleed and a 25 mm hem. Correx board: 3 mm bleed
FinishingHem and eyelets every 500 mm, pole pockets, wind slits or rope in the hem, kept clear on the canvas
Large piecesTiled in the studio with a 25 mm overlap. Tiled output files Coming
Resolution100 dpi at the final size
Northgate Print Co.Sam AhmedStudio manager · 0117 496 0123Trim 85 × 55 mm · bleed 3 mm · safe area · 300 dpi
BleedSafe area
Cards and flyers
Small type and a trim edge, so the safe area does the work.
FacesFront and back at trimmed size: 85 × 55 mm cards, A5 flyers
Bleed and safe3 mm bleed and a safe area inside the trim
FoldsFold lines on leaflets, kept clear of text
Resolution300 dpi; text from 1.5 mm
ComingPress-ready PDF/X-4 and imposition Coming
WORLD’S BEST NANWrap 200 × 85 mm · mirrored for the transfer paperThe handle line runs down the middle
Handle line
Mugs
A wrap that meets itself behind the handle.
AreasFull wrap 200 × 85 mm, or one side 85 × 85 mm
OutputMirrored for the sublimation transfer paper
BlanksLight, coated blanks only, as sublimation needs
Resolution120 dpi at size
OKAFOR11Back panel 400 × 600 mm · 6 mm seam · mirrored · one file per player
Seam allowance
Team kits
Sublimated panels, one for every player on the roster.
PanelsFront and back 400 × 600 mm, sleeves and collar as their own parts
Seam6 mm allowance at every panel edge
OutputMirrored, one file per player with their name and number
BlanksLight polyester, 65% or more
07 · Options and rules
Options for the buyer. Limits that only get tighter.
Sizes, materials and finishing are options on the product, with rules between them. Underneath, every limit flows down from the machine, and each level can only narrow it.
Size, typed by the buyer
1200×600mm
Material
Vinyl 510 gsmMesh · windy sitesCorrex 4 mm
Finishing
Hem + eyeletsPole pocketsRope in hemWind slits
Mesh already lets the wind through, so wind slits step aside, with the reason shown.
Rules only narrow. The printer sets the ceiling, the product and the store can only go lower. Try 2400 mm and the back office says which level said no.
08 · From your suppliers
Their range, in your catalogue, at your price.
Import blanks from Ralawise, PenCarrie and L-Shop-Team with their colours, sizes and stock. Your price rule turns their cost into your price.
Your rule, rounded to .50, applied to every style you import
Your price£18.00Club hoodieIn your catalogue, ready for the studio
Cost went up on 3 styles. Ralawise raised the 2XL to £9.90. Your price stays until you approve the new one.
09 · Pricing
Priced the way each product is made.
Every area has its own price table, on the basis that fits its method. The studio, the storefront and your quotes use the same rules, so a price never changes between them.
Q-1042 · Hillcrest School210 club hoodies, one linePriced
Club hoodie · navy£3,780.00Quantity breaks210 × £18.00, the 100+ break
Left chest · embroidery£1,449.00Per 1,000 stitches9,800 stitches × 210
Full back · screen print£798.00Colours × quantity2 colours × 210, dark garment
Screens£50.00Setup2 screens, once per job
Digitising£45.00SetupThe crest, once
Line total, before VAT£6,122.00
Colours × quantity
Screen print by ink count and run length, with a dark-garment factor for the white base.
Per 1,000 stitches
Embroidery priced from the stitch estimate, by quantity.
Per m², by material
Banners and signs from the size the buyer typed and the material picked.
Size bands
DTF, DTG and vinyl by the size of the print.
Breaks, minimums and setup
Quantity breaks on the blank, a minimum per job, and setup charged once.
10 · Names and numbers
One roster. A file for every shirt.
Team orders carry a roster on the order line: name, number and size for each player. Send the organiser a link to fill it in, then every piece gets its own print file.
Buyers see their design on the colour they picked.
Every product shows a layered preview of each side, in each of its colours.
NORTHGATE
One design, every colour, every side.
The preview is drawn from the product’s own photos and print areas, so what the buyer sees is where it will print.
In the studio, as they design
On the product page, before they open the studio
On the proof they approve
Coming3D preview: turn a jersey, mug or cap around in the studio.
12 · One product
Set up once. Used everywhere.
The product you set up is the one the storefront sells, the studio decorates, your quotes price and the floor makes. Change it once and all four follow.
Club hoodie4 areas · 5 methods · 40 colours
Your storefront
The product page, its colours, sizes and price breaks.
The studio
Only the areas and methods this product takes.
Your quotes
A quote line priced by exactly the same rules.
The floor
The job, its print files and the stock it uses.
One price rule. A quote can never price by a different rule from the studio.
FAQ
About products
Not answered here? Write to us and a person from the shop-floor team replies within a working day.
Do I have to set every product up myself?
No. Load the packs for what you sell and 16 product types arrive with their print areas measured and their methods matched. Then change sizes, areas and prices to suit your floor, or import blanks from your suppliers.
Can I add a product you have not listed?
Yes. In the back office you add a product type with its sides, its print areas in millimetres and the methods each area takes. It then works in the studio, the storefront and your quotes like any other.
How do buyer-sized products work?
The buyer types the width and height. The studio builds the canvas with bleed, a safe area and keep-outs for hems and eyelets, and prices it per square metre of the material they picked.
Do you have Pantone or thread colour charts?
Not yet. Buyers pick from your own garment colours today, and the method limits hold the ink or thread count. Colour libraries are coming.
Is there a 3D preview?
Not yet. Previews are layered 2D, side by side, in every colour of the product. 3D for jerseys, mugs and caps is coming.
Set up your range once.
Free for 14 days · no card · pick what you make and we preload the methods, products and price tables.
Cookies on a1printsoft.com. We use only what the site needs to work unless you accept a partner's referral being kept for 60 days. The site uses no analytics. Declining changes nothing on the site. Cookie policy